Metal Roof and Trim

Panel-Loc Plus™

Panel-Loc Plus ™ is a low rib & 3/4” panel which provides durable performance with an added striation on top of the rib that gives it even more strength. Panel-Loc Plus™ gives agricultural and light commercial projects, as well as residential roofs, the protection of steel with an attractive appearance. It is available in 26 and 29 gauge steel, as well as aluminum.

General Information

Panel-Loc™

Panel-Loc™ is a low rib & 5/8” panel that is best used for post frame barns and buildings, as well as residential roofing. Panel-Loc™ is available in 26 and 29 gauge steel.

General Information

R-Loc

R-Loc™ is a 26 gauge commercial panel that is an excellent choice for projects that require commercial grade performance. R-Loc™ is designedto maximize the potential of your styructures, specifically the steel frame. With its added purlin bearing rib, you can count on easier installation and a more pleasing appearance.

• Panel Rib Height: 1 1/4″
• Panel Coverage: 36″ wide
• Panel Length: 26″ to 45′ in .5″ increments
• Tensile Strength: 80,000 psi minimum

• Substrate: Varies by option; Galvalume
• Gauge: 26
• Recommended Roof Slope: 1/2:12 or greater roof slopes and ideal for low pitch commercial roofs

M-Loc

M-Loc™ is a structural roof and wall panel that can be installed directly over purlins or joists. The M-Loc™ panel is available in 26 gauge. This commercial panel has long served customers with lasting durability in commercial type applications.

• Panel Rib Height: 3/4″every 6 inches
• Panel Coverage: 36″ wide
• Panel Length: 26″ to 45′ in .5″ increments
• Tensile Strength: 80,000 psi minimum

• Substrate: Varies by option; Galvalume
• Gauge: 26
• Recommended Roof Slope: 1:12 pitch

Horizon-Loc

Horizon-Loc™ is a durable concealed fastener roof system with easy snap together installation. This architectural panel system uses minimally visible fasteners, giving your building a clean, attractive finish. The panel’s easy snap-on ribs attach rapidly with no hand seaming, making installation less expensive than traditional standing seam.

• Panel Rib Height: 1″
• Panel Coverage: 16″ wide
• Panel Length: 3′ to 40′ in 1″ increments, maximum recommended length = 35′

• Tensile Strength: 50,000 psi minimum
• Substrate: Varies by option; Galvalume
• Gauge: 26
• Recommended Roof Slope: 3:12 pitch

Precision-Loc

Precision-Loc™ is our 26 gauge commercial/industrial wall and soffit panel. Precision-Loc™ is available with one rib (perforated or solid), two ribs (solid only) and solid flat (no ribs).

General Information

Central Seam Plus

Central Seam Plus™ is a trapezoidal standing seam system designed for commercial and architectural projects. Central Seam Plus™’ mechanically seamed system begins and ends in the high, reducing the risk of leakage at the rake.

• Panel Rib Height: 3″
• Panel Coverage: Available in:
  • 24″ with minor ribs – prepunched 6 holes or no punching
  • 18″ with minor ribs – prepunched 5 holes or no punching
• Panel Length: 26″ to 45′ in .5″ increments

• Tensile Strength: 50,000 psi minimum
• Substrate: Galvalume
• Gauge: 24 (22 and 26 gauge material optional. Contact sales rep for more information.)
• Sealed with a superior factory-applied hot-melt mastic

Central-Loc

Central-Loc™ is a snap-together trapezoidal roofing system that is an excellent choice for commercial applications. Central-Loc™ is manufactured from Galvalume which offers two to four times the corrosion resistance of galvanized steel.

• Panel Rib Height: 3″
• Panel Coverage: Available in:
  • 24″ with minor ribs – prepunched 6 holes or no punching
  • 18″ with minor ribs – prepunched 5 holes or no punching
• Panel Length: 26″ to 45′ in .5″ increments
• Tensile Strength: 50,000 psi minimum

• Substrate: Galvalume
• Gauge: 24 (22 and 26 gauge material optional. Contact sales rep for more information.)
• Recommended Roof Slope: 1/4:12 pitch
• Sealed with a superior factory-applied hot-melt mastic

Central-Snap

Central-Snap is a vertical 1 3/4″ snap-lock standing seam panel system that is sturdy and fire resistant, making it ideal for architectural and commercial applications. Installation is a snap, and its Galvalume substrate offers two to four times the corrosion resistance of galvanized steel. 24 Gauge Flat Sheets are also available.

• Panel Rib Height: 1 3/4″
• Panel Coverage: Available in 16″ coverage with subtle striations between ribs
• Panel Length: 36″ to 52′ in .5″ increments
• Tensile Strength: 50,000 psi minimum
• Substrate: Galvalume

• Gauge: 24 (22 gauge material optional. Contact sales rep for more information.)
• Factory-applied hot melt sealant is standard.
• Available with a 1 3/16″ notch at one or both ends of each panel for the ease of turning under; reducing installation labor and costs.
• Recommended minimum slope: 3:12